 |
New and most popular Items |
|
Go to our Secure Online Order Form
|
Sonic– Enjoy total versatility with the Sonic camera system.
You can side mount
on both the left and right side with our variable pitch
camera brackets plus a front mount for your still camera and a big 5”x
7” top platform. Add an eyesight and you’re ready to shoot! Features
lightweight fiberglass construction, plush internal liner for a great
fit, a ratcheting chincup and dual audible altimeter pockets.
Dial in just the camera configuration you need with the optional Sonic
camera mounting kit. Available in Black, White or Red. |
|
|
Whatever your
type of flying, the ION helmet is designed with your kind of
skydiving in mind! It's the only helmet that incorporates an advanced
design Kevlar composite construction that is strong and amazingly
lightweight. The ION offers excellent peripheral vision and is
designed for RW, freeflying, and tandem work. And if you're into
camera flying, it's easy to upgrade your helmet to fully
"camera-ready" at any time with a variety of
camera platforms and other
accessories.
|
|
| ARTICULATING
BRACKET - This bracket was made to solve the problem of
freefly helmets having a neoprene forehead area. The problem is that
in order to mount a ringsight, you must place it too far away from
your eye in order to avoid jamming it into your eye while putting
the helmet on. This makes it pretty hard to use a sight and the
metal juts so far out that it is a safety hazard. The articulating clamp allows you to mount a post that is spring loaded and rotates to allow you to move the sight out of the way and put the helmet on. As you can see, the pin and slot on the front of the mount allows a 90 degree axial movement. Then rotate the shaft to move the sight back into place. Kit comes with three Allen head mounting screws, Allen wrench, and articulating bracket. It's the perfect way to add a ringsight to many of today's freefly helmets. The sight mounts to this bracket with a normal swivel clamp. $55.00
|
|
 |
This .43x ultra-wide
angle lens is extremely small, and was created for digital/video
cameras that have 37mm sized filter threads or smaller. It can also
be fitted to cameras with a smaller filter thread size by using a
step-up ring. This high quality lens has an extreme curvature of
field, or fisheye effect and will increase your video camera's field
of view by a full 135%. This allows you to work very close to your
subjects for striking visual angles and effects. The optical glass
lens elements are multicoated to reduce the possibility of flare,
ghosting and internal reflection. The lens simply screws on like a
filter and come with lens caps and handy storage case. $110.00 (If your camera has a smaller lens thread size, see our selection of step-up rings below)
|
| STANDARD
QUICK
RELEASE ADAPTER -
Attaches
to any helmet with a flat surface for secure mounting and quick
release of your video or still cameras. The quick release is
threaded for ¼ -20 and 3/8" and will work with all video, 35mm
and medium format cameras. It snaps in quickly to positively lock
the camera down to any flat surface and releases with the push of a
front release lever. The unit measures 3.25” x 2.5” x 3/4” (LxWxH) and weights 7.75 ounces. This
quick release mounts easily to the top of any helmet with a flat
surface. To mount to your helmet simply drill a hole on the top
surface of a flat top helmet. Secure the bottom plate down to the
top of the helmet by using the appropriate diameter screw through
the inside of the helmet (screw not included). Next, using the
supplied 1/4" tripod socket screw, fasten the camera to the top
plate. Then simply snap the top plate to the bottom plate and
you’re ready to go. - $60.00
|
|
|
COMPACT
CAMERA QUICK RELEASE
-
Attaches
to any helmet with a flat surface for secure mounting and quick
release of your video or still cameras. The compact quick release is
threaded for ¼ -20 and will work with all video and 35mm cameras.
It snaps in quickly to positively lock the camera down to any flat
surface and releases with the push of a side release button. The
unit measures 3.5” x 2” x 1/2” (LxWxH) and weights only 5.5
ounces. Mounting on the flat surface of the camera helmet is easy by
securing the bottom plate to the helmet using the supplied mounting
bolt through the inside of the helmet. Fasten the camera to the top
plate using the supplied 1/4" tripod socket screw. You simply
snap the top plate to the bottom plate and it’s ready to go. - $85.00
|
|
|
TONGUE
SWITCH still camera trigger kit - Now it's easy to trigger
your still camera with the press of your tongue. Small and compact, it
is operated by a movement similar to pressing your tongue against the
front teeth to fire off a shot. The tongue switch is totally encased
in rubber and is completely waterproof. The unit has an overall length
of 23" and a 3/32" sub mini-plug attached for plugging into
most Canon still cameras. If you are using another brand of camera you
can easily cut off the sub-mini plug and splice the cable wires into
the remote shutter release plug made for your particular 35mm camera.
The Tongue Switch works with even the tightest full-face helmets and
chin cups, and requires no jaw movement.
|
|
|
The
CAMERA CONDOM
PC is a
protective neoprene cover fits your video camera like a glove. They are
easy to put on and are designed to help protect the camera from dust,
condensation, cold weather, lens fog and damage from riser slap and
abrasion. The thermal properties of neoprene insulate your camera from
rapid temperature changes which cause condensation, cold weather shutdown
and lens fog. The Camera Condom is form fitting and has a Velcro closure
in the rear. It eliminates the need for a bulky, non-aerodynamic rigid
enclosure. They are currently available for:
|
 |
The
CAMERA
CONDOM
TRV is a
protective neoprene cover that is designed to fit specific Sony TRV video
cameras like a glove. They are easy to put on and designed to help protect
the camera from dust, condensation, cold weather, lens fog and damage from
riser slap and abrasion. The thermal properties of neoprene insulate your
camera from rapid temperature changes that cause condensation, cold
weather shutdown and lens fog. The Camera Condom is form fitting and has a
Velcro closure in the rear. It eliminates the need for a bulky,
non-aerodynamic rigid enclosure. They are currently available for: Sony TRV18, TRV25, TRV27, TRV38, TRV39, TRV70 & TRV80- $35.00 *Please specify which camera you have when ordering.
|
|
RATCHETING CHIN CUP ASSEMBLY
- This easy to install, rigid
chin cup modification offers additional stability and is most popular for
helmets equipped with one or more camera platforms. Designed to fit
the Velocity helmet, it is adaptable to other popular helmets also. The unique ratcheting system makes it quick and easy to adjust the
chin cup for a comfortable, secure fit. The kit comes complete with a rigid
chin cup with soft liner, attachment hardware, and mounting instructions.
$40.00
|
|
| HELMET
CASE - This quality rigid helmet case is great for
protecting your investment! It is made of sleek aluminum with rigid
sides and will hold most all the camera helmets sizes on the market.
It comes in especially handy when you are transporting your camera
helmet to your local drop zone or checking it for a long commercial
airline trip. The case features a removable lid and also has a
lockable closing latch for security. The inside dimensions of the
case are 13" wide X 10" deep X 12.5" tall. Available
in black. $99.00
|
|
Go to our Secure Online Order Form
2007
Vantek.net
Last revised:
December 23, 2006
